top of page

Gallery - Manufactured Stone

Manufactured stone veneer was installed on the (1) exterior gabled wall of the residence to approximately 14’ high.  The stone was “Eldorado Stone” – Cypress Ridge (Orchard) and it was installed directly to cement board.

Project is located in Ambler Township, PA.

Manufactured stone veneer (Eldorado Stone - Alderwood) was installed directly to cement board on the (3) walls of the interior fireplace.

Project is located in Souderton, PA.

Project was similar to the other projects we have completed for this client with stucco installed around the perimeter of the new building and manufactured stone at the base of the wall.  Also included the decorative metal expansion joint to separate the various colors of stucco. 

Project is located in Richboro, PA.

Project included cmu foundations, stucco and manufactured stone.  A decorative metal expansion joint was designed to separate the various colors of stucco and the top of the curved wall required a fabricated cannamould trim. 

 

Project is located in Allentown, PA.

Stucco installed around the perimeter of the new building accented with manufactured stone at the base of the wall.  A decorative metal expansion joint was designed to separate the various colors of stucco and the top of the curved wall required a fabricated cannamould trim.

 

Project is located in Upper Providence, PA.

Eldorado Stone installed on the front and side of the residence with the top of the walls and the window openings receiving a flagstone sill.  Front entrance received flagstone paving, riser and a thresh hold. Full height interior fireplace received Eldorado Stone and a flagstone hearth.

 

Project is located in Franconia, PA.

E. P. Henry stone installed directly to the (4) existing concrete walls.  

 

Project is located in Hatboro, PA.

Stucco installed around the perimeter of the new building accented with manufactured stone.  A decorative metal expansion joint separated the various colors of stucco and the top of the curved wall required a fabricated cannamould trim.

 

Project is located in Newtown, PA.

Cmu foundations and split-faced cmu for the exterior walls with a portion of the building receiving manufactured stone.  Interior consisted of 8” cmu walls, (2) stair towers and an elevator.

 

Project is located in Hatfield, PA.

Cmu foundations and cmu elevators, stair towers, dividing walls, retaining walls and fire walls.  Manufactured stone veneer installed around perimeter of the building as well as the retaining walls which received wall caps.

 

Project is located in Canadensis, PA.

Manufactured stone and stucco installed on the perimeter of the new building.  This location included a large towered entrance with arched openings.

 

Project is located in Souderton, PA.

bottom of page